CJWQF - Q28572 SANI CLOTH GERMICIDAL DISPOSABLE CLOTH
- MSDS: CJWQF
- Manufacturer: PDI PROFESSIONAL DISPOSABLES INC DIV NICE PARK PRODUCTS INC
- Product Name: Q28572 SANI CLOTH GERMICIDAL DISPOSABLE CLOTH
- National Stock Number: 6530-01-375-5624
Product Identification
Product ID:Q28572 SANI CLOTH GERMICIDAL DISPOSABLE CLOTH
MSDS Date:03/01/1998
FSC:6530
NIIN:01-375-5624
Status Code:A
MSDS Number: CJWQF
Responsible Party
ORANGEBURG, NY 10962-1376
US
Emergency Phone: 914-365-1700
Info Phone: 914-365-1700
Cage: 4T844
Contractor
Telephone: 914-365-1700
Cage: 4T844
Ingredients
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 980 MG/M3;400 PPM
ACGIH TLV: 983 MG/M3;400 PPM
QUATERNARY AMMONIUM COMPOUND
CAS: 27479-28-3
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN & EYE IRRITATION.
Effects of Overexposure:IRRITATION, RASH
First Aid
First Aid:SKIN: IF RASH/IRRITATION DEVELOPS, DISCONTINUE USE. EYES:
FLUSH W/COOL WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH AIR.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:=39.4C, 103.F
Extinguishing Media:WATER, FOAM
Fire Fighting Procedures:TREAT PRODUCT AS COMBUSTIBLE.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PICK UP W/ABSORBENT.
Handling
Handling and Storage Precautions:AVOID HIGH HEAT & SOURCES OF IGNITION.
Exposure Controls
Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR WHEN HANDLING
BULK LIQUID IF EXPOSURE LEVEL IS EXCEEDED.
Ventilation:RECOMMENDED.
Protective Gloves:RECOMMENDED
Eye Protection:REQUIRED IF SPLASHING MAY OCCUR.
Other Protective Equipment:NONE
Work Hygienic Practices:FOLLOW GOOD HOUSEKEEPING PRACTICES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=82.8C, 181.F
Spec Gravity:0.983
Solubility in Water:COMPLETE
Appearance and Odor:APPLICATOR SATURATED W/CLEAR LIQUID W/ALCOHOL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ANIONIC SURFACTANT, SOAPS
Stability Condition to Avoid:HIGH HEAT, OTHER SOURCES OF IGNITION
Conditions to Avoid Polymerization:PRODUCT DOES NOT REACT
W/FORMALDEHYDE.
Disposal
Waste Disposal Methods:TREAT AS FLAMMABLE LIQUID. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.